Maintenance
43
4 Select Utilities > DTX Utilities > Software Update
from the LinkWare menu, locate and select the .dtx
(DTX update) file; then click Open.
5 When the tester is updated, it reboots, then prompts
you about updating the smart remote’s software.
Press
K OK to update the smart remote’s
software.
6 To verify the update, turn the rotary switch to
SPECIAL FUNCTIONS; then select Version
Information.
USB or
DTX RS-232
serial cable
TEST
LOW BATTERY
TONE
TALK
FAIL
TEST
PASS
TALK
TALK
MONITOR
ENTER
TEST
SAVE
SPECIAL
FUNCTIONS
SETUP
AUTO
TEST
SINGLE
TEST
EXIT
F1 F2 F3
amd72f.eps
Figure 16. Updating the Software with a PC
To Next Page
Loading...
