Maintenance
47
Maintenance
Follow the maintenance procedures given in the DTX
Series CableAnalyzer Users Manual.
Clean the optical connectors as described on page 10.
Replacing Fiber Reference Test Cords
Choose replacement fiber optic reference test cords that
meet the following requirements:
• Core and cladding size: match the fiber to be tested
• Connector polish: PC or UPC
• Reference test cord length: maximum 5 m
To ensure optimum performance from your tester, get
replacement reference test cords from Fluke Networks.
Using the Smart Remote with an
OptiFiber
Certifying OTDR
You can use a DTX Series smart remote with a
DTX-MFM2 or DTX-SFM2 fiber module as the remote for
a Fluke Networks OptiFiber Certifying OTDR. The DTX
remote takes the place of a second OptiFiber tester for
measuring loss and length with the OptiFiber loss/length
option in Smart Remote mode. You can buy a smart
remote separately for this purpose. See the Fluke
Networks website or contact Fluke Networks for details.
To Next Page
Loading...
