Fluke 771 User Manual

®
771
Milliamp Process Clamp Meter
Calibration Manual
November 2007
© 2007 Fluke Corporation, All rights reserved. Printed in USA. Product specifications are subject to change without notice.
All product names are trademarks of their respective companies.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca

Fluke 771 Specifications

General

Operating altitude	0 - 2000 m
Storage temperature (T-T)	-25 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Product type	Digital multimeter
Product color	Grey, Red, Yellow
DC current range	0.021 - 0.1 A
Resolution (DC current)	0.21 µA
Basic accuracy (DC current)	1% + 5 counts
Battery type	AA
Power source	Battery
Battery voltage	1.5 V
Battery technology	Alkaline
Number of batteries supported	2

Weight and Dimensions

Depth	38 mm
Width	59 mm
Height	212 mm
Weight	260 g

Summary

Introduction

Precautions and safety information

Provides precautions and safety information related to the manual's content.

Calibration verification procedure

Details the procedure for verifying the meter's calibration.

Safety Information

Warning

Highlights critical safety warnings to prevent electric shock or personal injury.

Caution

Specifications

Maintenance

Battery Replacement

Performance Tests

Required Equipment

Accuracy Tests

Provides information on accuracy specifications and conditions for performing tests.

Calibration Adjustment

Adjustment Subroutines

Introduces the four adjustment subroutines: Low Range, High Range, Temperature, and Phase.

Front Panel Operation for Adjustment

Explains how to enter calibration mode and use buttons like ZERO, HOLD, and others.

Calibration Error Messages

Calibration Adjustment Procedure

Temperature Adjustment Procedure

Low Range Adjustment Procedure

High Range Adjustment Procedure

Phase Adjustment Procedure