Technical Data
Fluke 771
Milliamp Process
Clamp Meter
Features include:
•
Measure mA signals for PLC and control system
analog I/O
•
Measure 4 to 20 mA output signals from transmitters
without breaking the loop
•
Best in class 0.2 % accuracy
•
Resolution and sensitivity to 0.01 mA
•
Hold function captures and displays changing
measurements
•
Dual backlit display with both mA measurement
and percent of 4 to 20 mA span
•
Measurement Spotlight illuminates hard to see wires
in dark enclosures
•
Detachable clamp with extension cable for measurements
in tight locations
•
Measure 10 to 50 mA signals in older control systems
using the 99.9 mA range
•
Automatic battery savings features
•
Power, 15 minutes automatic power down
•
Backlight, 2 minutes, automatic off
•
Spotlight, 2 minutes, automatic off
Automatic battery saving features can be disabled if desired.
Measure 4 to 20 mA
signals without
breaking the loop
To Next Page
