Need help?Do you have a question about the Fluke 772 and is the answer not in the manual?
General| Operating altitude | 0 - 2000 m |
|---|---|
| Storage temperature (T-T) | -25 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Product type | Digital multimeter |
| Product color | Grey, Red, Yellow |
| AC current range | 0 - 0.024 A |
| Placement supported | Handheld multimeter |
| Basic accuracy (DC current) | 0.2% + 2 counts |
| Battery type | AA |
| Power source | Battery |
| Battery voltage | 1.5 V |
| Battery technology | Alkaline |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 44 mm |
|---|---|
| Width | 70 mm |
| Height | 246 mm |
| Weight | 410 g |
Details electrical characteristics for DC current and voltage measurements and sourcing.
Covers mechanical, environmental, standards, and other operational specifications.
Instructions for safely cleaning the meter using a damp cloth and mild detergent.
Steps for replacing the meter's batteries, including necessary safety precautions.
Lists the necessary equipment with specifications for performing meter performance tests.
Procedures for testing batteries, display segments, hold mode, backlight, and spotlight LED.
Details accuracy test points and limits for DC current and voltage measurements.
Lists test points and limits for verifying DC current and voltage source accuracy.
How to enter calibration mode and an overview of the five meter functions available for adjustment.
Details buttons for calibration adjustments, exiting the mode, and common error messages.
Step-by-step guides for adjusting clamp measure, mA measure, and Volt measure functions.
Step-by-step guides for adjusting mA DC source and Volt DC source functions.
To Next Page
