Need help?Do you have a question about the Fluke 773 and is the answer not in the manual?
General| Operating altitude | 0 - 2000 m |
|---|---|
| Storage temperature (T-T) | -25 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Battery type | AA |
| Power source | Battery |
| Battery voltage | 1.5 V |
| Battery technology | Alkaline |
| Number of batteries supported | 4 |
| Product type | Digital multimeter |
| Product color | Grey, Red, Yellow |
| DC current range | 0 - 0.024 A |
| DC voltage range | 0 - 30 V |
| Placement supported | Handheld multimeter |
| Basic accuracy (DC current) | 0.2% + 2 counts |
Weight and Dimensions| Depth | 44 mm |
|---|---|
| Width | 70 mm |
| Height | 246 mm |
| Weight | 410 g |
Contact information for Fluke technical support, calibration, and repair services.
Crucial safety warnings and precautions to prevent injury and equipment damage.
Details electrical characteristics, ranges, resolution, and accuracy for the meter's functions.
Physical dimensions and weight of the Milliamp Process Clamp Meter.
Details operating temperature, humidity, altitude, and IP rating.
Covers power requirements and automatic timeout features.
Instructions for cleaning the instrument case using a damp cloth and mild detergent.
Procedure for safely replacing the meter's batteries when the indicator appears.
Lists the necessary equipment and recommended models for performing performance tests.
Verifies display clarity, hold mode, backlight, and spotlight LED operation.
Performance test points for verifying accuracy of mA DC clamp measurements.
Performance test points for verifying accuracy of mA DC measurements.
Performance test points for verifying accuracy of Volts DC measurements.
Performance test points for verifying accuracy of mA DC source functions.
Performance test points for verifying accuracy of Volts DC source functions.
Details calibration buttons, modes, and handling of calibration error messages.
Step-by-step guide to adjust the mA DC Clamp Measure function.
Step-by-step guide to adjust the mA DC Measure function.
Step-by-step guide to adjust the Volts DC Measure function (773 only).
Step-by-step guide to adjust the mA DC Source function.
Step-by-step guide to adjust the Volts DC Source function (773 only).
To Next Page
