Milliamp Process Clamp Meter
Symbols
5
Symbols
Table 1 is a list of the symbols that are on the Meter or in this manual.
Table 1. Symbols
Symbol Explanation
Consult user documentation.
W
WARNING. RISK OF DANGER.
X WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Power on/off
-
Do not apply around or remove from uninsulated hazardous live conductors without
taking additional protective measures.
T Double Insulated
DC (Direct Current)
Earth Ground
Battery
P
Conforms to European Union directives.
Conforms to relevant Australian Safety and EMC standards.
)
Certified by CSA Group to North American safety standards.
Measurement Category II is applicable to test and measuring circuits connected directly
to utilization points (socket outlets and similar points) of the low-voltage MAINS
installation.
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building’s low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building’s low-voltage MAINS installation.
~
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
