To Next PageTo Next Page
Need help?Do you have a question about the Fluke 787 and is the answer not in the manual?
General| DC Voltage Measurement Range | 0 to 1000 V |
|---|---|
| DC Voltage Accuracy | ±(0.1% + 1 digit) |
| Safety Rating | CAT III 1000 V, CAT IV 600 V |
| Operating Temperature | -20°C to 55°C |
| Storage Temperature | -40°C to 60°C |
| Frequency Measurement Range | 2 Hz to 20 kHz |
| Loop Power Supply | 24 V |
| Display | Digital |
| Measurement Functions | Voltage, Current, Resistance, Frequency |
| mA Source | 0 to 20 mA |
| Battery Life | Typically 50 hours |
| Dimensions | 203 mm x 100 mm x 50 mm |
How to reach Fluke for support and product inquiries.
Essential safety precautions for meter operation and user protection.
Specific warnings to prevent damage to the product or test equipment.
Explains all symbols used in the manual and on the meter.
Step-by-step guide for new users to begin operating the meter.
Detailed description of the meter's input and output connection ports.
Explains rotary switch positions, buttons, and display indicators.
Information on input impedance and how to select appropriate measurement ranges.
Procedure for performing diode tests with the meter.
Using MIN MAX AVG recording to capture measurement extremes.
How to use TouchHold to freeze stable readings.
Compensating for test lead resistance using the relative feature.
Supplying current to a passive circuit using the meter's source mode.
Simulating a current loop transmitter with external power.
How to set the 0-20 mA or 4-20 mA current output span.
Generating a stable DC mA output and adjusting it.
Adjusting the mA output up or down in 25% steps.
Applying continuously varying current stimulus with different ramp types.
Configuring meter behavior on startup for convenience.
Information on typical battery life and methods to preserve it.
Proper use of the meter's protective holster for safety and care.
Guidelines for routine cleaning and general upkeep of the meter.
Recommended frequency and procedure for meter calibration.
Step-by-step instructions for replacing the meter's fuses.
Initial checks and actions to take if the meter fails to operate.
Information on how to identify and order replacement parts and accessories.
Detailed specifications for DC voltage measurements.
Detailed specifications for DC millivolt measurements.
Detailed specifications for AC voltage measurements.
Detailed specifications for AC current measurements.
Detailed specifications for DC current measurements.
Detailed specifications for resistance (ohms) measurements.
Detailed specifications for frequency counter accuracy.
Specifications for diode test and continuity functions.
Detailed specifications for DC current output functions.
Operating environment, safety ratings, and electromagnetic compatibility standards.
