1
Introduction
Warning
Read “Safety Information” before you use the
Meter.
Your Fluke 787 ProcessMeter (referred to as “the
Product or Meter”) is a handheld, battery-operated tool for
measuring electrical parameters and supplying steady or
ramping current to test process instruments. It has all the
features of a digital multimeter, plus current output
capability.
If the Meter is damaged or something is missing, contact
the place of purchase immediately.
Contact your Fluke distributor for information about DMM
accessories. To order replacement parts or spares, see
Table 13 near the end of this manual.
Contacting Fluke
To contact Fluke, call one of the following telephone
numbers:
• Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com
To Next Page
Loading...
