Fluke 787 - Current Output Functions; Source Mode Operation

ProcessMeter™
Getting Acquainted with the Meter
13
2
3
1
5
4
6
78
MIN MAX RANGE HOLD
H
REL Hz
% STEP COARSE FINE
ee003f.eps
Figure 5. Pushbuttons
Table 5. Pushbuttons
No. Pushbutton Function(s)

b Toggles the backlight

U
(BLUE)
Rotary switch in mA A Lposition and test lead plugged into c A jack: Toggles
between ac and dc ampere measure
Rotary switch in O position: Selects diode test function (D)
Rotary switch in OUTPUT mA Jposition: Cycles through
• Slow repeating 0 % -100 % - 0 % ramp (Eon display)
• Fast repeating 0 % -100 % - 0 % ramp (P on display)
• Repeating 0 % -100 % - 0 % ramp in 25 % steps (N on display)
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com