787
Users Manual
10
Table 3. Rotary Switch Positions for Measurements
No. Position Function(s) Pushbutton Actions
OFF
Meter off
V A
Default: measure
ac V
F
Frequency counter
M Selects a MIN, MAX, or AVG action (see pg. 18)
KSelects a fixed range (hold 1 second for auto range)
I Toggles TouchHold
C Toggles relative reading (sets a relative zero point)
d V
Measure dc V Same as above
d mV
Measure dc mV Same as above
O
Default: measure Ω
T for continuity
BLUE D test
Same as above, except diode test has only one range
mA A L
High test lead in
cA: measure A dc
BLUE selects ac
High test lead in
dmA: measure mA
dc
Same as above, except there is only one range for each input jack
position, 30 mA or 1A
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com
To Next Page
Loading...
