Fluke 771 Instruction Sheet

771 English Instruction Sheet
Page 1
®
771
Milliamp Process Clamp Meter
Instruction Sheet
Introduction
The Fluke 771 Milliamp Process Clamp Meter (“the Meter”) is a
hand-held battery-operated clamp meter that measures
4-20 mA dc without breaking the electrical circuit. Unlike
conventional clamp meters, the Meter features a remote jaw that
is connected to the main body via extension cable.
Features
• DC mA measurement (4-20 mA) using a remotely connected
clamp via extension cable
• Electronic zero
• Percentage span (0-100 %)
• Hold
• Display backlight
• Auto power off
• Measurement spotlight LED
The Meter comes with:
• Two AA alkaline batteries (installed)
• Soft case
• Instruction sheet
PN
2567301
September 2006
© 2006 Fluke Corporation. All rights reserved. Printed in China.
All product names are trademarks of their respective companies

Fluke 771 Specifications

General

Operating altitude	0 - 2000 m
Storage temperature (T-T)	-25 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Product type	Digital multimeter
Product color	Grey, Red, Yellow
DC current range	0.021 - 0.1 A
Resolution (DC current)	0.21 µA
Basic accuracy (DC current)	1% + 5 counts
Battery type	AA
Power source	Battery
Battery voltage	1.5 V
Battery technology	Alkaline
Number of batteries supported	2

Weight and Dimensions

Depth	38 mm
Width	59 mm
Height	212 mm
Weight	260 g