What to do if my Fluke 566 Thermometer display is blank?
If the display on your Fluke Thermometer is blank, it could be that the thermometer is in sleep mode or the batteries may be dead. Try pulling the trigger and replacing the batteries.
General| Accuracy | 1 °C |
|---|---|
| Product color | Black, Yellow |
| Response time | 500 ms |
| Minimum spot size | 19 mm |
| Spectral response | 8 - 14 µm |
| Data storage (points) | 20 |
| Min/Max temperature memory | Yes |
| Temperature measurement range | -40 - 650 °C |
| Temperature measurement units | F, °C |
| Battery type | AA |
| Number of batteries supported | 2 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
To Next Page
