Infrared Thermometer
Safety Information
3
For safe operation and maintenance of the
Product:
• Remove the batteries if the Product is not
used for an extended period of time, or if
stored in temperatures above 50 °C. If the
batteries are not removed, battery leakage
can damage the Product.
• Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
• Repair the Product before use if the batteries
leak.
• Be sure that the battery polarity is correct to
prevent battery leakage.
Caution
To avoid damage to the Product or the equipment
under test, protect them from:
• EMF (electro-magnetic fields) from arc
welders, induction heaters, etc.
• Static electricity
• Thermal shock (caused by large or abrupt
ambient temperature changes. For highest
accuracy, allow 30 minutes for Product to
stabilize before use).
To Next Page
Loading...
