Fluke 62 MAX + - Maintenance; How to Change the Battery; How to Clean the Product

62 MAX/62 MAX +
Users Manual
6
Maintenance
Caution
To avoid damage to the Product, do not leave the thermometer on or near
objects of high temperature.
How to Change the Battery
To install or change the AA IEC LR06 battery, open the battery compartment and replace the
battery as shown in Figure 16.
How to Clean the Product
Use soap and water on a damp sponge or soft cloth to clean the Product case. Carefully wipe
the surface with a moist cotton swab. The swab may be moistened with water. See Figure 17.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.ca