Recommended accessories – 712, 714 and 724 Calibrators
Specifications – 712 and 714 Calibrators
For more information, go to www.fluke.com/tempcal
Fluke 712, 714 and 724
Temperature Calibrators
Accurate and rugged,
temperature calibration tools.
Included accessories
Each 71X calibrator includes: C81Y
Protective Yellow Holster with
Flex-Stand
™
, test leads and alligator
clips (excluding model 714), single
9 V alkaline battery and instruction
sheet (14 languages).
Ordering information
Fluke-712 RTD Calibrator
Fluke-714
Themocouple Calibrator
Fluke-724 Temperature Calibrator
(also see page 29)
The Fluke 710 Series temperature calibrators deliver out-
standing performance, durability and reliability. Offered
in the rugged Fluke 80 Series DMM package, the calibra-
tors are compact, lightweight, and easy to carry. And
with a push-button interface, similar to the multifunction
Fluke 740 Series Documenting Process Calibrators, the
710s are easy to use. Each calibrator is EMI tolerant,
dust- and splash-resistant, and features a removable
battery door for quick battery changes.
Fluke 712 RTD Calibrator
• Compatible with pulsed current transmitters
• Measure temperature from an RTD probe
• Simulate RTD output
• Operates with seven types of RTD
• Measure additional RTDs using Ohms measurement
function
• Simulate additional RTDs using Ohms source function
• °F or °C selectable
• Four shrouded banana jacks
Fluke 714 Thermocouple Calibrator
• Measure temperature from TC probes
• Simulate TC output
• Operable with nine types of thermocouples
•
Calibrate linear TC transmitter with mV source function
• Selectable °F or °C
• Thermocouple mini-jack termination
• Available as accessories: Fluke 700TC1 and TC2
Thermocouple Mini-plug Kits
Model Function Range Resolution Accuracy Notes
Fluke-712 Measure/simulate -200 °C to 800 °C 0.1 °C, 0.1 °F 0.33 °C, 0.6 °F Pt; 100 200 500 1000
RTD (Pt 100-385) (Pt 100-385) (385); Pt 100 (392);
Pt 100 (392) JIS;
Ni 120 (672)
Measure/simulate 15 Ω to 3200 Ω 0.1 Ω 0.1 Ω to 1 Ω
Resistance
Fluke-714 Measure/simulate -200 °C to 1800 °C, 0.1 °C or °F 0.3 °C + 10 µV 9 TC types;
Thermocouple depending (1 °C or °F; BRS) J K T E R S B per NIST
on type 175 and ITS-90
(K, -200 °C to L U per DIN 43710 and
1370 °C) PTS-68
Measure/simulate -10 to 75 mV 0.01 mV 0.025 %
mV + 1 count
General specifications for all Fluke 712 through 718 calibrators
Maximum voltage:
30 V Non-operating temperature: -40 °C to 60 °C Operating temperature: -10 °C to 55 °C
Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating altitude: 3,000 m max Shock: 1m drop test Vibration: Random, 2 g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022:1994 Class B
Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz)
Size/weight (HxWxD) (712-717 with holster and FlexStand™): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz)
Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz)
Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz)
Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life: 4 to 20 hours, typical, depending on functions used
Warranty: Three-years (one year on pressure pump in Fluke 718)
TL75 (712 and 714) C550 (712 and 714) TL220 (712 and 714) C25 (712 and 714) 80PK-24 (714)
See page 39 See page 44 See page 39 See page 44 See page 42
TL75 (724) TL220 (724) C100 (724) 80PK-3A (724) 80PK-IR (724)
See page 39 See page 39 See page 44 See page 42 See page 42
Fluke 724 Temperature
Calibrator
• Source/measure TCs, RTDs, volts
and ohms
• Measure mA while supplying
loop power
• 25 % and 100 % stepping,
auto-step and auto ramp
• For specifications, see page 29
Temperature Calibration Data Sheet
(Literature code 1560369)
See how Fluke can help you
calibrate, troubleshoot and verify
the most common temperature
devices, faster and easier.
26
Need help?
General
