Fluke 73 III User Manual

70/73 English Instruction Sheet
Page 3
Automatic Touch Hold  Mode
W Warning
To avoid electric shock, do not use the Touch Hold
to determine if a circuit with high voltage is dead.
The Touch Hold
 mode will not capture unstable or
noisy readings.
The Touch Hold mode automatically captures and displays
stable readings. Press R for 2 seconds while turning the
meter on.
2 seconds
+
_
V DC
V DC
H
_
+
_
V DC
single
beep
V V V
hr3f.eps
When the meter captures a new input, it beeps and a new
reading is displayed. To manually force a new measurement to
be held, press R.
Note
Stray voltages can produce a new reading.
To exit the Touch Hold mode, turn the meter off.
Bar Graph
The bar graph shows readings relative to the full scale value of a
displayed measurement range and indicates polarity.
hr16f.eps

Fluke 73 III Specifications

General

Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600 V
Voltage DC	600 V
Voltage AC	600 V
Current DC	10 A
Current AC	10 A
Resistance	32 MΩ
Battery Type	9V