Fluke 73 III User Manual

70/73 English Instruction Sheet
Page 9
Cleaning
To clean the meter, use a damp cloth and mild detergent; do not
use abrasives or solvents on the meter.
Service and Parts
For service information in the U.S.A. and Canada, call 1-800-44-
FLUKE (1-800-443-5853), in Europe, 31 40 267 8200, from other
countries, 1-425-356-5500.
Item Description Fluke
PN
Quan.
BT1 Battery, 9 V, NEDA 1604/IEC 6F22, or
NEDA 1604A/IEC 6LR61
696534
614487
1
F1* Fuse, F630 mA, 250 V, Min Interrupt
Rating 1500 A, IEC 127-1
740670 1
F2* Fuse, F11 A, 1000 VAC/DC, Min
Interrupt Rating 17 kA
943118 1
* For safety, use exact replacement
Specifications
Accuracy is specified for a period of one year after calibration, at
18°C to 28°C (64°F to 82°F) with relative humidity to 90%. AC
conversions are ac-coupled, average responding, and calibrated
to the RMS value of a sine wave input.
Accuracy specifications are given as:
±([% of reading] + [number of least significant digits])
Maximum Voltage Between
any Terminal and Earth
Ground
600 V
Display Digital: 3,200 counts, updates 2.5/sec
Analog: 31 segments, updates 25/sec
Response Time of Digital
Display
V ac < 2 s
V dc < 1 s
Ω < 1 s to 320 kΩ, < 2s to 3.2 MΩ,
< 10 s to 32 MΩ
Operating Temperature 0°C to 50°C
Storage Temperature -40°C to 60°C
Temperature Coefficient
0.1 x (specified accuracy)/°C
(<18°C or >28°C)

Fluke 73 III Specifications

General

Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600 V
Voltage DC	600 V
Voltage AC	600 V
Current DC	10 A
Current AC	10 A
Resistance	32 MΩ
Battery Type	9V