To Next PageTo Next Page
Need help?Do you have a question about the Fluke 9170 and is the answer not in the manual?
General| Type | Metrology Well |
|---|---|
| Category | Temperature Calibrator |
| Temperature Range | -45 °C to 140 °C |
| Temperature Stability | ±0.005 °C |
| Resolution | 0.001 °C |
| Display Resolution | 0.001 °C |
| Display | LCD |
| Communication Interface | RS-232 |
| Accuracy | ±0.1 °C |
| Power Requirements | 100–240 V AC |
Overview of the Fluke Metrology Wells for laboratory and field use.
Explanation of international electrical symbols found on the instrument and manual.
Critical warnings to prevent personal injury during instrument operation.
Precautions to prevent damage to the Metrology Well instrument.
Details on compliance with the European Electromagnetic Compatibility Directive.
Information on the instrument's electromagnetic immunity and emission testing standards.
States compliance with the European Low Voltage Directive for safety standards.
Contact information for authorized service centers for Fluke products.
Detailed technical specifications for the 9170, 9171, 9172, and 9173 Metrology Wells.
Specifies the safe operating environmental conditions for the Metrology Well.
Instructions for unpacking and verifying the contents of the Metrology Well package.
Step-by-step guide for setting up the Metrology Well for operation.
Configuration steps for instrument parameters like language and decimal format.
Details on the front panel display features and settings.
Procedures for setting the desired temperature set-point for the Metrology Well.
Detailed steps for configuring the temperature set-point and control parameters.
Wiring details for connecting a PRT probe to the reference thermometer input.
Steps to set up and use the reference probe for temperature measurements.
Identification of components and connectors on the rear of the Metrology Well.
Identification of components and controls on the front of the Metrology Well.
Explanation of the information and functions shown on the front panel display.
Description of the functions of the front panel buttons and keys.
List of optional accessories available for the Metrology Well.
