38 Thermocouple Probes OVEN TRACKER XL2
High-temperature adhesive tape
For securing exposed-junction thermocouples. Pressure-sensitive silicone adhesive. Maximum
400°C/752°F.
HT0090 9 m/29.5 ft
Silicone-free High-temperature Kapton Sheet
For securing exposed-junction and patch probes in automotive applications. Pressure-sensitive
acrylic adhesive. Maximum 200°C/392°F. Cut to size and remove backing paper before use.
CS2090 200 × 300 mm/7.9 × 11.8 in.
MicroMag Thermocouple Mount
For securing exposed-junction thermocouple to ferrous
substrate to measure temperature of air or (using high-
temperature tape) substrate.
PA0980
Adhesive-patch Thermocouple
Attaches directly to light-gauge metal or plastic with
adhesive patch and/or high-temperature tape. Ideal where
fast response is required or in infra-red processes. PTFE-
insulated cable. Maximum 265°C/509°F.
PA0060 1.5 m/5 ft
PA0062 3.0 m/10 ft
MicroMag Magnetic Thermocouples
Attaches directly to ferrous substrate using strong SmCo
magnet with diameter only 17 mm/0.67 in. Ideal for
measuring temperature in tightest of recesses (aluminum
knob can be removed). PTFE-insulated cable. Maximum
265°C/509°F.
Air Thermocouple
PA0995 1.5 m/5 ft
PA0996 3.0 m/10 ft
PA0999 6.0 m/20 ft
Surface Thermocouple
PA0973 1.5 m/5 ft
PA0974 3.0 m/10 ft
PA0975 6.0 m/20 ft
Surface Offset Magnetic Thermocouple
Attaches directly to flat ferrous substrate to measure
surface temperature. PTFE-insulated cable. Maximum
265°C/509°F.
PA0053 1.5 m/5 ft
PA0054 3.0 m/10 ft
PA0050 6.0 m/20 ft
To Next Page
Loading...
