Specifications
MemoryPaq +
1 × Transducer Interface
6 or 8 channels
MemoryPaq + Dual Interface Block +
2 × Transducer Interface
12, 14 or 16 channels
Length
Width
Height
170 mm/6.7 in.
75 mm/3.0 in.
24 mm/0.9 in.
207 mm/8.1 in.
75 mm/3.0 in.
50 mm/2.0 in.
Thermocouple Type K
Accuracy ±0.3°C/0.5°F (logger at room temperature, measuring max.
200ºC, max. 8 channels selected, sample interval 5 s or greater;
for accuracy under other conditions, contact Datapaq)
Resolution 0.1°C/0.2°F
Measurement range -200°C to 1,370°C/-328°F to 2,498°F
Operating temperature
(without thermal barrier)
0°C to 85°C/32°F to 185°F
Storage temperature
(excluding battery)
-55°C to 100°C/-67°F to 212°F
Humidity range 0–85% non-condensing
Sample interval 0.5 s to 1 s, in 0.1-s increments
1 s to 50 min., in 1-s increments
Memory capacity 4 Mb (see p. 23).
Data-collection start Plug-and-go, or rising temperature
Pre-trigger data stored Yes (configurable; see p. 61)
Hot-data protection By non-volatile memory, and software warning if reset attempted
before download
Logger reset Normally via Insight software. Hardware reboot and reset
possible (p. 26), giving defaults of 5-s sample interval, plug-and-go
trigger; data already collected is not deleted.
Onboard features Data analysis (SmartPaq function, see p. 50). Storage of
calibration data and service history (see p. 27).
Multiple runs 10 runs possible before download of data (see p. 48, p. 57)
Real-time monitoring Hardwired telemetry via communications lead
Over-temperature
protection
Warning or prevention of reset if internal temperature above
user-defined level. Start of logging prevented above 45°C/113°F.
Auto shutdown (data preserved) if internal temperature above
85°C/185°F. See p. 26.
Communications USB, using standard-A to mini-B cable.
Auto-detection by PC Yes (see p. 46)
PC/software compatibility See p. 13.
Battery Datapaq NiMH rechargeable battery-pack
Battery life 57 hrs continuous use at room temperature with 5-s sample
interval (see p. 25)
Battery charger CH0070B power-supply unit: input 90–264 V AC, 50–60 Hz,
400 mA
OVEN TRACKER XL2 Logger Specifications and Operation 19
To Next Page
Loading...
