40 Thermocouple Probes OVEN TRACKER XL2
IRMag Surface Thermocouple
Magnetic attachment (maximum 300°C/572°F), to measure
surface temperature of ferrous substrate in infra-red cure
oven. Easy attachment and fast thermocouple response.
High-temperature glass-fiber-insulated cable with stainless-
steel outer braid prevents damage from infra-red heaters
(maximum 400°C/752°F). Ideal for automotive infra-red
repair ovens.
PA1361A 1.5 m/5 ft
PA1362A 3.0 m/10 ft
PA0980 Replacement mount
PA1371 1.5 m/5 ft Replacement cable and guide
PA1372 3.0 m/10 ft Replacement cable and guide
Aluminum Automotive Body Shell Surface
Thermocouple
Surface-temperature measurement in aluminum car body
shell. Spring-loaded bobbin clips to any recess in inner car
body skin. Sprung-steel arm is adjusted to position sensor
on outer body skin. PTFE-insulated cable. Maximum
265°C/509°F.
PA0030 Spring-action mount
PA0032 1.5 m/5 ft cable, with arm assembly
PA0033 3.0 m/10 ft cable, with arm assembly
Aluminum Automotive Body Shell Air
Thermocouple
Air-temperature measurement in aluminum car body shell.
Spring-loaded bobbin clips to any recess in inner car body
skin. PTFE-insulated cable. Maximum 265°C/509°F.
PA0030 Spring-action mount
PA0036 1.5 m/5 ft cable, with arm assembly
PA0037 3.0 m/10 ft cable, with arm assembly
Thermocouple Cable Tidy
Keeps cable routing even, prevents kinking and tangling,
and helps with probe identification and handling. Up to
eight cables.
PA2050A
Thermocouple ID Tags
Aluminum tags fitted to sensor end of thermocouple cable
to allow clear identification of probe number even when
thermal barrier is closed.
PA2051A Set numbered 1–8
To Next Page
Loading...
