To Next PageTo Next Page
Need help?Do you have a question about the Fluke DTX-SFM2 and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | DTX-SFM2 |
| Category | Control Unit |
| Language | English |
Register your product with Fluke Networks for updates, troubleshooting tips, and support.
Information on how to contact Fluke Networks for technical assistance and support.
Guidance on locating and accessing the detailed technical reference handbook for the DTX Series.
Information on accessing the Fluke Networks Knowledge Base for cable testing techniques.
Lists the accessories included with the DTX-MFM2 multimode fiber modules.
Lists the accessories included with the DTX-GFM2 multimode fiber modules.
Lists the accessories included with the DTX-SFM2 singlemode fiber modules.
Instructions on how to install and remove fiber modules from the DTX tester.
Procedures for cleaning fiber connectors and adapters to ensure accurate test results.
Specific cleaning instructions for the fiber module's input connector.
Guidance on periodic cleaning of connector and fiber adapters.
Instructions for performing autotest in Smart Remote mode for dual-fiber cabling.
Details on the various test settings applicable to fiber optic cabling tests.
Explains the importance of using high-quality, good condition test reference cords.
Lists the times when test reference cords should be tested.
Lists the necessary equipment for testing reference cords.
Procedure for setting the reference value for testing test reference cords.
Instructions for testing the loss of a test reference cord in both directions.
