Getting Acquainted
Basic Features
1-23
1
Figure 1-10. The Main Autotest Screen (for Twisted Pair Media)
amd05f.eps
E
Outlet Configuration: The wire mapping used for testing twisted
pair cabling.
F
Press L to check the memory status.
G
Press K to view the results of the previous test.
H
If a copper adapter and a fiber module are installed, press J
to change the type of media you will test.
I
Store Plot Data
•
No: Plot data is not saved, which lets you save more results.
Saved results show worst margins and worst values for each
pair.
•
Standard: The tester displays and saves plot data for
frequency-based tests such as NEXT, return loss, and
attenuation. The tester saves data for the frequency range
required by the selected test limit.
•
Extended: The tester saves data beyond the frequency range
required by the selected test limit.
J
Folder: The folder where results will be saved.
K
Operator, Site: Operator: The person using the tester. Site: The
job site name. These are stored with saved results.
A
The media type selected for testing.
B
Battery status icon.
C
Test Limit: The tester compares test results to the
selected limit to determine the PASS/FAIL result.
D
Cable Type: The type of cable to be tested.
1
6
7
8
9
11
2
3
4
10
5
To Next Page
Loading...
