Fluke Ti40 - Page 88

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
8-6
To change the standby to off timeout time:
1. Tap F.
2. Use the mouse controller to position the pointer over Camera Settings on
the popup menu.
3. Tap E.
4. Position the pointer over the Power tab and tap E.
5. Position the pointer over the Standby To Off Timeout down arrow and
press E.
6. Position the pointer over the time you want and press E.
7. Tap
to accept setting change and return to scan target mode.