To Next PageTo Next Page
Need help?Do you have a question about the Fluke TiS40 and is the answer not in the manual?
General| Weight | 0.72 Kg (1.6 lb) |
|---|---|
| Battery Life | 4 hours |
| Field of View | 35.7 ° x 26.8 ° |
| Thermal Sensitivity (N.E.T.D) | < 0.05 °C |
| Focus System | Fixed focus |
| Detector Type | Uncooled microbolometer |
| Image Frequency | 9 Hz |
| Data Transfer | USB |
| Accuracy | ±2 °C or ±2% of reading |
| Interface | USB |
| Temperature Range | -20 °C to +350 °C |
| Display | 3.5 inch LCD |
| Operating Temperature | -10 °C to 50 °C |
| Resolution | 160 x 120 pixels |
| Thermal Sensitivity | <0.05°C at 30°C |
| IR Resolution | 160 x 120 pixels |
| Storage Temperature | -20 °C to 60 °C |
Instructions for charging and initial use of the imager's battery.
Steps for capturing and saving thermal images.
Instructions for recording audio annotations for captured images.
Accessing and adjusting measurement parameters like range and emissivity.
Setting automatic or manual level and span for temperature measurement.
Fine-tuning the temperature level in manual ranging mode.
Adjusting the temperature span in manual ranging mode.
Changing false-color presentations of infrared images.
Utilizing aligned visible and infrared images for analysis.
Accuracy and range details for temperature measurements.
Details on IFOV, thermal sensitivity (NETD), and pixel count.
Available file formats for saving images and data, including video recording.
