To Next PageTo Next Page
Need help?Do you have a question about the Fluke Ti32 and is the answer not in the manual?
General| Resolution | 320 x 240 pixels |
|---|---|
| Temperature Range | -20 °C to +600 °C (-4 °F to +1112 °F) |
| Field of View | 23° x 17° |
| Focus | Manual |
| Spatial Resolution (IFOV) | 1.25 mRad |
| Laser Pointer | Yes |
| Data Storage | SD memory card |
| Operating Temperature | -10 °C to +50 °C (14 °F to 122 °F) |
| Thermal Sensitivity | ≤ 0.045 °C at 30 °C target temperature (45 mK) |
| Battery Life | 4 hours continuous use |
| Image Frequency | 9 Hz |
| Accuracy | ±2°C or ±2% of reading, whichever is greater |
| Spectral Range | 7.5 µm to 14 µm |
| Storage Temperature | -20 °C to +50 °C (-4 °F to 122 °F) without battery |
| Weight | 1.2 kg (2.65 lb) |
| Battery Type | Rechargeable |
Essential safety precautions and warnings for using the thermal imager.
Contact details for Fluke support and service.
Instructions for powering the thermal imager on and off.
Connecting the imager to AC power for charging or operation.
Setting the imager's display language.
Adjusting general imager settings like language and display.
Selecting between Celsius and Fahrenheit for temperature display.
Defining a measurement zone for temperature analysis.
Choosing thermal image color palettes for better visualization.
Configuring automatic or manual temperature range settings.
Factors affecting and ensuring accurate thermal measurements.
Controlling the display of hot and cold spot indicators.
Adjusting emissivity values for accurate temperature readings.
Configuring high-temperature or dewpoint alarms.
Procedures for inserting and ejecting the SD memory card.
Proper methods for cleaning the imager's sensitive infrared lens.
