Need help?Do you have a question about the Fluke Ti20 and is the answer not in the manual?
General| Detector Type | Uncooled microbolometer |
|---|---|
| Resolution | 160 x 120 pixels |
| Field of View | 23° x 17° |
| Display | Built-in color LCD |
| Accuracy | ± 2 °C or 2% (whichever is greater) |
| Focus | Fixed |
| Battery Life | 3-5 hours continuous |
Crucial safety warnings and precautions for operating the Imager safely.
Displays warning labels related to laser safety for the Imager.
Identifies and describes the Imager's physical features and controls.
Provides instructions on how to properly focus the Imager for accurate radiometric measurements.
Procedure for powering the Imager on and off.
Step-by-step guide to capturing and storing thermal images.
Guide to manually setting the Level value for image definition.
How to adjust the temperature span for better gradient visualization.
Explanation of emissivity and methods to determine and adjust it.
How to use RTC to improve measurement accuracy.
Instructions for deleting images from the Imager.
Steps to adjust the emissivity setting for accurate measurements.
Guide to setting high and low temperature alarm limits.
To Next Page
