Getting Started
Inputs and Connections 1
1-13
Inputs and Connections
Connecting the USB Cable
The included USB cable can be used to either download or upload data from a PC to the
Imager. To connect the USB cable, insert the smaller USB connector into the Imager port
and the larger connector into the PC USB port as shown in Figure 1-9. Communications
begin automatically, and a USB symbol (I) appears in the header area of the Imager
display when communications are established.
THERMAL IMAGER
Ti20
THERMAL IMAGER
Ti20
dag009f.eps
Figure 1-9. Connecting Using the USB Cable
To Next Page
Loading...
