Ti20
Users Manual
3-2
Deleting Images
Deleting an image deletes the image in the active memory location but retains location
description, any notes, emissivity, and RTC setting.
W Caution
The delete all selection completely erases the Imager flash
memory including all images, notes, emissivity values, and RTC
settings. Flash memory returns to the factory default state.
1. From the Home display, press G (
MENU) two times.
2. Press F (
MEMORY) to access the Delete function.
dag114f.bmp
3. Press H for the Delete mode display.
4. Press F (
YES) to delete the image you are viewing or H (DELETE ALL) to
delete all stored images. F deletes the displayed images but retains the memory
location and information (location description, notes, emissivity, and RTC). You
can also press G (
CANCEL) to return to the Review mode display.
To Next Page
Loading...
