EasyManuals Logo

Fluke TiS40 Safety Information

Fluke TiS40
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TiS10, TiS20
TiS40, TiS45
TiS50, TiS55
TiS60, TiS65
Performance Series
Thermal Imagers
Safety Information
Go to www.fluke.com to register your product and find more
information.
A Warning identifies conditions and procedures that are dangerous to
the user.
 Warning
To prevent eye damage and personal injury:
Do not look into the laser. Do not point the laser
directly at persons or animals or indirectly off
reflective surfaces.
Do not open the Product. The laser beam is
dangerous to eyes. Have the Product repaired only
through an approved technical site.
Additional laser warning information is on the inside of the Product
lens cover.
hwj010.eps
PN 4633357 July 2015
©2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without notification.
All product names are trademarks of their respective companies.

Other manuals for Fluke TiS40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke TiS40 and is the answer not in the manual?

Fluke TiS40 Specifications

General IconGeneral
Weight0.72 Kg (1.6 lb)
Battery Life4 hours
Field of View35.7 ° x 26.8 °
Thermal Sensitivity (N.E.T.D)< 0.05 °C
Focus SystemFixed focus
Detector TypeUncooled microbolometer
Image Frequency9 Hz
Data TransferUSB
Accuracy±2 °C or ±2% of reading
InterfaceUSB
Temperature Range-20 °C to +350 °C
Display3.5 inch LCD
Operating Temperature-10 °C to 50 °C
Resolution160 x 120 pixels
Thermal Sensitivity<0.05°C at 30°C
IR Resolution160 x 120 pixels
Storage Temperature-20 °C to 60 °C

Related product manuals