Warning
To prevent personal injury:
• Read all safety information before you use the
Product.
• Carefully read all instructions.
• Use the Product only as specified, or the protection
supplied by the Product can be compromised.
• Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
• Do not use the Product if it operates incorrectly.
• Do not use the Product if it is damaged.
• See emissivity information for actual temperatures.
Reflective objects result in lower than actual
temperature measurements. These objects pose a
burn hazard.
• Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
• Do not put battery cells and battery packs near heat
or fire. Do not put in sunlight.
• Do not disassemble or crush battery cells and
battery packs.
• Remove batteries to prevent battery leakage and
damage to the Product if it is not used for an
extended period.
• Connect the battery charger to the mains power
outlet before the charger.
• Use only Fluke approved power adapters to charge
the battery.
• Keep cells and battery packs clean and dry. Clean
dirty connectors with a dry, clean cloth.
To Next Page
Loading...
