Type Fluval 104 Fluval 204 Fluval 304 Fluval 404
Item Number
A-200 A-205 A-210 A-215
Filter Volume Liters 3.2
l
4.6
l
6.6
l
8.5
l
Filter Baskets Number 2 3 3 4
Pump Output
l
/h 480 680 1000 1300
Pump Output US g/h 125 180 260 340
Technical Specifications
Spare Parts
Pre-Filter – L A-1470 (750 g)
Fluval Pre-Filter consists of inert, solid ceramic rings used to trap large and medium solid particles before they
clog the finer sieves of the media baskets above. The media forces water into many complex paths as it
moves through this layer. This further increases its mechanical and biological activity and expands the actual
contacted filter area. An additional benefit, it supports large populations of bacteria for proper biological
action on ammonia and nitrite.
This reduces the need for frequent changes of the active filter media. Pre-Filter is permanent, and requires
only occasional rinsing. This media can be used in fresh and marine environments without difficulty.
Zeo-Carb – L, M, H A-1490 (3x150 g), A-1495 (600 g)
Zeo-Carb combines UltraGrade Carbon with Ammonia Remover to protect the aquarium from build-ups of
both ammonia and liquified wastes, dyes and medications. The ammonia remover will also help remove the
ammonia released when the chloramine bond in some municipal water supplies must be broken. The purity
of the carbon prolongs active life and releases no phosphates into the water. Zeo-Carb should be replaced
at least every month, more often if the aquarium is heavily loaded to ensure that the medias remain active
and useful.
Parts Fluval 104 Fluval 204 Fluval 304 Fluval 404
A Rubber Feet A-20121 A-20121 A-20121 A-20121
B MSF Motor Housing A-20180 A-20185 A-20190 A-20195
C Foam Screen Frame A-20117 A-20137 A-20137 A-20177
D Media Basket A-20045 A-20045 A-20070 A-20070
E Media Basket Tray A-20047 A-20047
F Media Basket Cover A-20042 A-20042 A-20067 A-20067
G Motor Seal Ring A-20038 A-20038 A-20063 A-20063
I Aqua-Stop A-20060 A-20060 A-20060 A-20060
J Intake Strainer with check ball A-20007 A-20007 A-20007 A-20007
K Intake Stem A-20005 A-20005 A-20005 A-20005
L Suction Cup (40 mm) with clip A-15520 A-15520 A-15520 A-15520
M1 Hosing Bracket A-20026 A-20026 A-20026 A-20026
M2
Retaining Ring (Hosing Bracket)
A-20028 A-20028 A-20028 A-20028
N 30 mm Suction Cup A-15041 A-15041 A-15041 A-15041
O Output Nozzle A-20001 A-20001 A-20001 A-20001
P Ribbed Hosing A-20014 A-20014 A-20015 A-20015
Q Hose-Lock Nuts A-20058 A-20058 A-20058 A-20058
R Rubber Adapter A-20016 A-20016 A-20017 A-20017
S Hose Elbow A-20018 A-20018 A-20019 A-20019
T Self-Primer Assembly A-20020 A-20020 A-20020 A-20020
U MSF Filter Case A-20182 A-20187 A-20192 A-20197
V1 Ceramic Shaft Assembly A-20041 A-20041
V2
Ceramic Shaft + Rubber Support
A-20066 A-20066
W Magnetic Impeller A-20111 A-20111 A-20152 A-20172
X Impeller Cover A-20116 A-20136 A-20156 A-20156
Y
Impeller Well Insert A-20174 A-20174
Z Ceramic Shaft Tool A-17015 A-17015
E12
To Next Page
Loading...
