Useful Tips
19
Do not turn on the bike when the brake levers are depressed as this
will trigger the faulty brake sensor and disable the motor.
Inspect the bolts on a regular basis, to ensure that they are tight
and all components are secure. This is especially important if you are
riding in demanding conditions. As with all bikes pay particular attention
to the crank bolts, as they are subject to more loosening forces than any
other bolt.
Regularly check the brake pads, the provided Tektro pads should
be replaced if they have:
Been contaminated
Less than .8mm of material
Cracks or deformation
To replace the brake pads or perform other maintenance take it to
a qualified professional at your local bike shop.
The bike has a powerful mid-motor which places more stress on
the gears than a regular bike. Reducing the force placed on the pedals
whilst shifting will prolong the life of the drivetrain.
Properly inflate your tires according to riding conditions.
Under-inflated tires are prone to pinch flats, especially if riding off-road
o
Check the throttle connection underneath the neoprene sleeve
if the throttle doesn’t work initially.
r over sharp edges. If you are unsure of the proper pressure, read the tire.
To Next Page
Loading...
