can result in fire. Always follow the manufacturer’s instructions when disposing of Lithium Polymer batteries.
RECENT MOISTURE
RC models are composed of many precision electrical components. It is critical to keep the model and associated
equipment away from moisture and other contaminants. The introduction or exposure to water or moisture in any
form can cause the model to malfunction resulting in loss of use, or a crash. Do not operate or expose to rain or
moisture.
PROPER OPERATION
Please use the replacement of parts on the manual to ensure the safety of instructors. This product Is for the RIC
model, so do not use it for another purpose.
SAFEEE OPEEERAAATIONNN
Do not attempt to grab or make contact with the helicopter while the main blades are in motion and keep your eyes
away from the helicopter. During take-off, landing, and flight, be sure to keep the helicopter away from all obstacles.
Operators must stand at least 10 meters away from the helicopter to avoid injury caused by loose parts due to
improper assembly or any unforeseen dangers. Operate this unit within your ability. Do not fly under tiring conditions
and improper operation may cause danger. Never take your eyes off the model or leave it unattended while it is
turned on. Immediately turn off the model and transmitter when you have landed the model
OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT ALWAYS BE AWARE OF THE ROTATING BLADES
KEEP AWAY FROM HEAT
About Transmitter
FW450 using FS-i6S transmitter which is 2.4GHz, 1km* control distance The FS-I6S has a built-in dual
omnidirectional antenna
To Next Page
Loading...
