landing:
Slowly pull the throttle stick down and the helicopter lowers the flight altitude until it drops to the ground. Pull the
throttle stick to the lowest position and hold it, turn the start safety switch to the flameout to stop the motor.
● Do not stop the motor during the flight, or the aircraft will crash. Unless special circumstances occur (such as an
aircraft that may crash into a crowd), an emergency stop of the motor is required to minimize damage.
● The helicopter will not be able to take off during a severe low battery alarm.
● The propeller will rotate at high speed after starting the helicopter motor, which is dangerous. The operator should
keep a distance from the helicopter and keep the helicopter away from people and buildings, trees or other
obstructions to avoid impact.
● Return Function
Smart return:
Turning transmitter’s stick to return . Then helicopter can automatically return Then dial to GPS mode to terminate the
return flight.
Low battery return: When the power system
determines that the current power is only enough to return and land, the helicopter will automatically return.
● When the transmitter signal is normal, the transmitter can be used to control the flight direction during the return
flight.
Appendix
Helicopter Status Indicator Description
To Next Page
