25
Display Icons
Location Description
1 Speedometer
2 Headlight Status Indicator
3 Pedal Assist Level
4 Battery Life Indicator
5 Odometer
Display Controls
Location Description Operating Instructions
6 Power Button
Push and hold to turn display on/o
Tap to cycle odometer
7 “+” Button
Push and hold to turn headlight on/o
Tap to increase pedal assist level
8 “–” Button
Push and hold to enable walking mode
Tap to decrease pedal assist level
WALKING MODE
Walking mode is a feature to aid the user when walking the bike when the
handlebar display is on. To enable walking mode, push and hold the “-“ button on
the display. The motor will engage at a steady speed of approximately 3MPH. To
turn o walking mode at any time, release the “-“ button or squeeze either hand
brake to disable the motor.
Note: Walking mode should only be used while dismounted from the bike and with both hands
on the handlebar. Always keep at least one hand on a brake lever to allow quick cuto of the
motor assistance if necessary.
To Next Page
Loading...
