EasyManua.ls Logo

Flyer L885 - Flight Speed Battery; Battery and Charger Safety Warnings

Flyer L885
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
FLIGHT SPEED™ BATTERY
Battery and Charger Safety Warnings
WARNING! TO PREVENT FIRE, EXPLOSIONS, OR ELECTRIC SHOCK:
Before using the battery read all instructions and cautionary markings on the
charger and battery pack.
Only use the specied Flyer™ charger (Model SPBC4802A, made by MDA Power
Technology Co limited) to charge this battery. Do not attempt to charge with any
other chargers. Replacement chargers are available to purchase exclusively at flyer.
radioflyer.com or by calling Radio Flyer Customer Service at 1-800-621-7613.
Do not store the battery in locations where the temperature is below 14°F (-10°C)
or above 10F (4C)
Do not charge the battery in temperatures below 32°F (0°C) or above 10F
(4C). The battery will not charge outside of these temperate limits.
Do not operate the charger or battery if it has been impacted, dropped, or
damaged in any way.
Do not use if the power cord is frayed, has broken insulation, or any other signs
of damage.
If the plastic on the battery breaks or cracks, stop use and call Radio Flyer
Customer Service.
Examine the charger and battery before each use and replace if wear or damage
is found.
Do not incinerate the battery pack. The battery can explode in a fire.
Never attempt to open or disassemble the battery pack or charger for any reason.
Do not puncture the battery.
To prevent electric shock, do not immerse the charger or battery in water.
Do not attempt to charge if the cord or power adapter is wet.
To clean, remove the charger/battery plug from the outlet and wipe with a dry cloth.
During charging, the battery must be placed on a flat surface in a dry ventilated area.
Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive heat. Place the charger away from any heat
sources.
The charger is designed to operate on a standard household electrical power
(110/120 VDC). Do not attempt to use the charger on any other voltage level.

Related product manuals