flyfly hobby FF-B045 User Manual

Basic parts
110
211
312
Simple easy DG-505 Manual
Model No:FF-B044/FF-B045
Scale Glider Radio control airplane Wingspan:2.6M
Carbon Rod 10*420mm for main wing joinner
PVC Servo cover 4pcs
M4*20 Butterfly Screws for lock the wings
FF12-05 Linkage Stoppers*10/set
M3*10 Screws*4pcs for locking motor
Metal Collar*2/set
1
3
4
5
6
7
8
9
10
12
13
14
15
11
413
514
615
716
8
9
UNDER SAFETY PRECAUTIONS
This radio controlled plane is not a toy!
Always keep this instruction manual ready on hand for quick reference.
Assemble this kit only places out of children reach.
First-time builders of RC radio power model should seek the advice of experienced modellers
before beginning assembly and if they do not fully understand any parts of the construction.
Taking out liability insurance is recommended.
You are responsible for this model’s assembly and safe operation.
Carbon pin 6*50mm 4pcs for stable wings
Push Rod M1.5*65 *5pcs for Flap,rudder and
004-00140 Hinges*3
Soft wire*2pcs for elevator
LL04-405B Horns 8pcs for push all the servos
Metal Pinned Hinges*4pcs for canopy
2*25mm 6pcs Pin for Wingtips
2*8mm Screws 35 pcs
Metal Clevis M1.5 *3pcs
M4*35 Screws*2/pcs for locking the stable tail
Page 1

flyfly hobby FF-B045 Specifications

General

Brand	flyfly hobby
Model	FF-B045
Category	Toy
Language	English

Summary

Installing the Wings

Servo Horn and Push Rod Connection

Fixing push rods to servo horns and ensuring servo horns remain flat relative to linkage stoppers.

Servo Installation in Tray

Securing the servo into its tray using two screws.

Installing Elevator and Tail Rudder

Elevator and Rudder Hinges

Attaching hinges to the tail and rudder using A/B glue.

Elevator Servo Wire Routing

Routing the elevator servo wire from the tail to the nose fuselage.

Locking the Elevator

Securing the elevator in the tail fuselage after installation.

Canopy Installation

Canopy Framework Attachment

Using A/B glue to fix the transparent canopy shape to the framework.

Joining Wings and Decals

Wing Assembly

Joining the wings using a carbon rod and securing with a carbon pin.

Decal Placement

Applying decals to the wing, fuselage, and tail sections.

Motor, ESC, and Adjustment

Motor and ESC Installation

Connecting and installing the motor and Electronic Speed Controller (ESC).

Control Surface Deflection

Specifying deflection angles for ailerons (20mm) and elevator (25mm).

Center of Gravity (CG) Adjustment

Adjusting the CG position to achieve desired control characteristics.