flyfly hobby FF-B045 - Installing Elevator and Tail Rudder; Elevator and Rudder Hinges; Elevator Servo Wire Routing; Locking the Elevator

(2). Installing elevator & Tail Rudder: need to preparing 17g metal servos*2 pcs (FF item no:FF9-912)
Servos extension cables 800mm*2pcs (Flyfly item no:FF14-03)
Parts:Horns(FF item no:LL04-406A/B),Soft wire, Metal collar, servo tray, push rod
Linkage Stoppers(FF item no: FF12-05)
A/B Glue 3pcs
Hinges to the tail
& rudder
Soft wire
Metal Collar
Horns
Elevator After installed like this photos
Servo tray
Elevator servo wire across
from here to the nose fusealge
Locked the Elevator on the tail
fuselage
Soft wire across from tail
to the nose fuselage here.
Used linkage stoppers to
lock the wire
Page 3