Need help?Do you have a question about the FLYGT 4660.490 and is the answer not in the manual?
General| Model | 4660.490 |
|---|---|
| Category | Water Pump |
| Material | Cast Iron |
| Protection Class | IP68 |
| Type | Submersible Pump |
| Frequency | 50 Hz |
| Liquid temperature | Max 40°C |
Crucial safety rules for installation work, including personal safety and hazard awareness.
Specific requirement for explosion-proof mixer installation by authorized personnel.
Detailed steps for installing the PP-pump, including bracket and guide bar setup.
Requirement for explosion-proof mixer electrical connections by authorized personnel.
Safety rules for electrical work, including isolation, grounding, and hazard warnings.
Safety advice for contact with machines or media, including GFI and safety distances.
Essential checks before starting the machine, including oil level and propeller rotation.
Instructions for mixer operation, including test runs, current surge, and vibration.
Guidelines for PP-pump operation, covering start-up, current surge, and potential issues.
Safety measures before starting maintenance, including isolation, cleaning, and hygiene.
Recommended inspection and service intervals (Group A and B) for mixers.
Items to be checked during inspection, including components, connections, and oil.
Steps for draining oil, including safety, and recommended oil volumes for different sizes.
Step-by-step guide on how to safely remove the propeller from the shaft.
Instructions for installing the propeller, including preparation, components, and tightening torque.
Checklist for diagnosing why the machine fails to start, including panel signals and voltage checks.
To Next Page
