FLYGT C3501 User Manual

Xylem Water Solutions AB (the Company) was previously named ITT Water &
Wastewater AB. The name change took place in November 2011. This is document is
(i) a document that relates to a product of the Company phased out prior to the name
change; or (ii) an old version of documentation relating to a product that is still being
produced by the Company but which document was published prior to the 1st of
January 2012 . This document may therefore still be marked "ITT". Xylem Water
Solutions AB is no longer an ITT company and the fact that "ITT" may appear on this
document shall not be interpreted as a reference by the Company to "ITT" in the
Company's current business activities. Any use or reference to “ITT” by you is strictly
prohibited. In no event will we be liable for any incidental, indirect, consequential,
punitive or special damages of any kind, or any other damages whatsoever, including,
without limitation, those resulting from loss of profit, loss of contracts, loss of reputation,
goodwill, data, information, income, anticipated savings or business relationships for any
use by you of “ITT”. This disclaimer notice shall be interpreted and governed by Swedish
law, and any disputes in relation to it are subject to the jurisdiction of the courts in Sweden.
If you do not agree to these terms and conditions you should not print this document and
immediately stop accessing it.

FLYGT C3501 Specifications

General

Max flow	500 l/s
Max head	65 m
Application	Wastewater and sewage
Impeller type	Vortex
Frequency	50/60 Hz

Summary

Introduction and Safety

Safety

Crucial safety warnings and precautions for operating and handling the equipment.

User Safety

General safety rules, required safety equipment, and handling of hazardous liquids.

Transportation and Storage

Transportation Guidelines

Lifting

Procedures and requirements for safe lifting of the pump using appropriate equipment.

Installation

Install the Pump

General precautions and requirements for installing the pump safely.

Install with P-installation

Install with S-installation

Install with T/Z-installation

Make the Electrical Connections

Requirements and precautions for making electrical connections by certified electricians.

Connect the Cables

Connect the Coolant

Check the Impeller Rotation

Operation

Precautions

Essential safety precautions to follow during pump operation.

Start the Pump

Step-by-step guide for safely starting the pump and performing checks.

Maintenance

General Maintenance Precautions

Safety guidelines, isolation, and general requirements before maintenance.

Inspection and Service

Regular inspection procedures and major overhaul steps for pump reliability.

Component Checks

Fluid Management

Procedures for draining coolant and changing oil in the pump.

Component Replacement and Lifting

Assembly and Tightening Procedures

Technical Reference

Motor Data

Pump Performance Data

Detailed performance curves and rating tables for various pump models and frequencies.