FLYGT C3501 - Product Description; Pump Design; Intended Use; Approvals

Product Description
Pump Design
Intended Use
The product is intended for moving waste water, sludge, raw and clean water. Always follow the limits
given in Application limits (page 110). If there is a question regarding the intended use of the equipment,
please contact an ITT representative before proceeding.
WARNING:
In explosive or flammable environments, only use Ex- or MSHA-approved pumps.
NOTICE:
Do NOT use the pump in highly corrosive liquids.
Approvals
This section describes the EN and FM approvals that explosion-proof products have. For more
information, please contact your ITT representative.
In addition to the data plate, explosion-proof products also have either an EN or a FM approval plate.
EN
European Norm (EN) approvals:
• ATEX Directive
• EN 50014, EN50018, EN 1127-1
•
II 2 G EEx dII T4/T3 (6x5)
• II 2 G EEx dIIB T4/T3 (7x5)
•
II 2 G EEx dII T3 (8x5)
• II 2 G EEx dII T4(25°C)/T3 (9x5)
(T4 on option.)
1 2 3
4
5
6 7
8
9 10
12
11
13
14
15
1. Approval
2. Approval authority + Approval Number
3. Approval for Class I
4. Approved drive unit
5. Stall time
6. Starting current; Rated current
Product Description
20 C3300/6x5, C/R3231, C3240, C3306, C3312, C3351, C3356, C3400, C3501, C3531, C3602, C3800 Installation,
Operation and Maintenance Manual