FLYGT C/R3231 User Manual

Xylem Water Solutions AB (the Company) was previously named ITT Water &
Wastewater AB. The name change took place in November 2011. This is document is
(i) a document that relates to a product of the Company phased out prior to the name
change; or (ii) an old version of documentation relating to a product that is still being
produced by the Company but which document was published prior to the 1st of
January 2012 . This document may therefore still be marked "ITT". Xylem Water
Solutions AB is no longer an ITT company and the fact that "ITT" may appear on this
document shall not be interpreted as a reference by the Company to "ITT" in the
Company's current business activities. Any use or reference to “ITT” by you is strictly
prohibited. In no event will we be liable for any incidental, indirect, consequential,
punitive or special damages of any kind, or any other damages whatsoever, including,
without limitation, those resulting from loss of profit, loss of contracts, loss of reputation,
goodwill, data, information, income, anticipated savings or business relationships for any
use by you of “ITT”. This disclaimer notice shall be interpreted and governed by Swedish
law, and any disputes in relation to it are subject to the jurisdiction of the courts in Sweden.
If you do not agree to these terms and conditions you should not print this document and
immediately stop accessing it.

FLYGT C/R3231 Specifications

General

Model	C/R 3231
Frequency	50 Hz
Maximum Head	14.5 m
Max Head	14.5 m
Material	Cast Iron
Maximum Flow	Up to 400 l/s (6300 gpm)
Max Flow	Up to 400 l/s (6300 gpm)

Summary

Introduction and Safety

Safety Precautions

Safety message levels, user safety rules, hazardous liquids, and Ex-approved products.

Transportation and Storage

Transportation Guidelines

Lifting and Handling

Safe lifting practices, equipment requirements, and link placement.

Product Description

Monitoring Equipment

MAS/CAS systems, sensors, and monitoring parameters.

Cooling Systems

Installation

Pump Installation and Fasteners

General installation, fasteners, and locking device removal.

Installation Types

Electrical Connections and Cables

Electrical precautions, requirements, cables, and connections.

Coolant and Seal Flushing

Impeller Rotation Check

Operation

Operational Precautions and Start-up

Maintenance

Service and Inspection

Maintenance intervals, inspection steps, and general service.

Overhaul and Component Replacement

Major overhaul tasks and replacement of pump components.

Specific Component Checks