10 – English
TROUBLESHOOTING
Fails to Operate
1 Is the correct Starting procedure being followed?
See "To Start your Lawnmower."
2 Is the Power Turned On?
3 Check the fuse in the plug. Replace if blown.
Poor Grass Collection
1 Disconnect from the mains electricity supply.
2 Clean the outside of the air intakes, the discharge
chute and the underside of the deck.
3 Raise to a higher height of cut. See "Cutting Height
Adjustment."
Excessive Vibration
1 Disconnect from the mains electricity supply.
2 Check that the blade is tted correctly.
3 If the blade is damaged or worn, replace it with a
new one.
Lawnmower becomes heavy to
push
1 Disconnect from the mains electricity supply.
2 In long grass or uneven ground, the height of cut
should be raised to a higher position. See "Cutting
Height Adjustment."
3 Check that the wheels and rollers can rotate freely.
To Next Page
Loading...
Need help?
General
