Flytec 5030 GPS
Briefly pressing the software key F1 let you choose following inputs
Next Pr WP = next or previous Waypoint
Mod Alt1 Modify Alt1 ; (only possible so long no recording takes place )
Mod Alt2 Modify Alt2 or reset with F2
HT man = automatic* or manual input of wind component (Head/Tailwind)
Please read also 5.6 Final glide calculations
*automatic means: the windcomponent is calculated by the difference: grnd spd - air spd
a negative result signifies Headwind a positive result means Tailwind
26/53
To Next Page
Loading...
