EasyManua.ls Logo

Flyzone DHC-2 Beaver - User Manual

Flyzone DHC-2 Beaver
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2016 Hobbico
®
, Inc. All rights reserved. FLZA4120
Length:
38.5 in
[980mm]
Radio:
5-channel
radio system
Motor:
40mm dia.
850kV outrunner,
40A ESC,
12x6 propeller
SPECIFICATIONS
Wingspan:
59.5 in
[1510mm]
Wing
Area:
430 in
2
[27.7 dm
2
]
Weight:
3–3.25 lb
[13601470 g]
Wing
Loading:
1617 oz/ft
2
[49 52 g/dm
2
]
READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
WARRANTY
Flyzone guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use
or modication. In no case shall Flyzone’s liability exceed the
original cost of the purchased kit. Further, Flyzone reserves the
right to change or modify this warranty without notice.
In that Flyzone has no control over the nal assembly or material
used for nal assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of
the nal user-assembled product. By the act of using the
user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated with
the use of this product, the buyer is advised to return this kit
immediately in new and unused condition to the place of
purchase.
To make a warranty claim send the defective part or item to
Hobby Services at the address below:
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign IL 61822 USA
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone
number, fax number, e-mail address), a detailed description of
the problem and a photocopy of the purchase receipt. Upon
receipt of the package the problem will be evaluated as quickly
as possible.
INSTRUCTION MANUAL
Island Wings Select
Question and Answer IconNeed help?

Do you have a question about the Flyzone DHC-2 Beaver and is the answer not in the manual?

Summary

Safety Precautions

Assembly

Mount the Landing Gear

Instructions for attaching the main and tail landing gear to the fuselage.

Mount the Horizontal and Vertical Stabilizer

Mount the Wings

Install the Battery

Failsafe Setting and Function

ESC Operation and Startup

Throttle Calibration

Brake Setting

Hook Up Rudder and Elevator

Hook Up Flaps and Ailerons

Final Flight Preparation

Check Control Throws

Verifying and adjusting control surface movements for correct flight characteristics.

Mount the Propeller and Spinner

Motor and Propeller Safety Precautions

Check the Center of Gravity (C.G.)

Flying the Beaver

Powering Up and Down Procedures

Safe procedures for powering the model on and off before and after flights.

Flyzone DHC-2 Beaver Specifications

General IconGeneral
BrandFlyzone
ModelDHC-2 Beaver
CategoryToy
LanguageEnglish

Related product manuals