FMC Technologies FMC L06 User Manual

Doc No: OMM50000903
Rev: B Page 1 of 65
Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
OPERATION AND MAINTENANCE MANUAL, L06 THROUGH L16
TRIPLEX PUMPS
Rev ECN No. Date Reviewed By Approved By Status
B 5018139 29-MAY-2007 Lyon, Tim Singleterry, Ronald RELEASED
Summary:
This is a manual for FMC L06 through L16 triplex piston pumps. These pumps include
direct drive (no pinion shaft) and pinion drive (for internal gear reduction) and have a
stroke length ranging from 1.50” through 4.00”.

FMC Technologies FMC L06 Specifications

General

Brand	FMC Technologies
Model	FMC L06
Category	Water Pump
Language	English

Summary

Important Safety Instructions

L06-L16 Pump Features Overview

Pump Storage Procedures

Short Term Storage

Guidelines for storing pumps for less than six months indoors.

Short Term Storage for Severe Environments

Procedure for short-term storage in harsh environmental conditions.

Long Term Storage

Procedure for storing pumps for periods exceeding six months.

Returning a Stored Pump to Operation

Steps to take a stored pump back into service.

Precautions during Freezing Weather

Measures to protect the pump from freezing damage.

Installation Guidelines and Procedures

General Location

Recommendations for choosing a suitable pump installation site.

Mounting Pump to Foundation and Power Source

Instructions for securely mounting the pump to its base.

Bearingless Hydraulic Motor Drives

Details on mounting hydraulic motors to pump frames.

Suction Piping Recommendations

Guidelines for optimal suction line design and installation.

Discharge Piping Recommendations

Best practices for discharge piping to ensure efficiency.

Multiple Pump Systems

Considerations for installing and operating multiple pumps.

Pump Startup Procedure

Power End Lubrication and Oil Changes

Recommended Lubricants

Details on selecting appropriate lubricants for the power end.

Oil Changes

Schedule and procedures for changing power end oil.

Maintenance Schedule and Inspection Guide

Wearing Component Lifespan Estimates

Component Parts Identification

Pump Service and Repair Procedures

Replacing Cup Pistons

Step-by-step instructions for replacing pump piston cups.

Removing the Fluid Cylinder

Procedure for removing the fluid cylinder for inspection or repair.

Replacing Valves

Instructions for replacing disc, AR, and ball type valves.

Servicing the Power End

Procedures for servicing the power end components.

Critical Fastener Torque Specifications

Power End Critical Clearances

Valve Service Tools Guide

Pump Troubleshooting Guide

How to Order Pump Parts

Technical Terms Glossary

Pump Model Reference Data