Introduction
Contents of Kit
Model Assembly
Important ESC and model information
Get your model ready to fly
The transmitter and model setup
Check the control throws
Clevis Installation
Control Horn and Servo Arm Settings
Center of Gravity(CG)
Before flying the model
Flying Course
Troubleshooting
Spare parts list content
ESC instruction
Table of Contents
Introduction
3
····························································································································3
························································································································4
······················································································································5
·························································································9
·····································································································10
······························································································10
········································································································11
··················································································································12
·························································································12
·············································································································13
············································································································14
·······················································································································15
····················································································································16
···········································································································17
·····················································································································18
FMS is pleased to announce that all 64mm ducted fan aircrafts are being upgraded. Beginning with the release
of the 64mm F-15 V2. Inspired by the superior features of the original model, version two (V2) has improved
mechanical and structural features that will enhance air performance and decrease assembly time.
The fiber pipe greatly enhances the wing strength for enhanced flying maneuvers. Improved main wing set and
landing gear installation optimizes strength of structure and reduces assembly time.
The latest 64mm ducted fan can achieve more than 800 grams of thrust.
The differences in speeds between the V1 and V2 will be noticeable. If you possess the “need for speed,”
accessories such as missiles can be removed to create a faster more streamlined model.
Upgrades
420mm fiber pipe inserted through the fuselage and main wing
Use of four inner-hexagon screws instead of glue improves main wing set and landing gear installation
optimizing strength of structure
New more powerful 64mm 11-blade ducted fan with up to 800 grams of thrust.
New 2840-KV3150 motor
New Predator 40A ESC
The latest FMS EPO foam material creates stronger, more impact-resistant planes.
Environmentally friendly water-based paint minimizes blistering from sun
Pre-installed newly designed control horns allows more throw
Features
420mm fiber pipe inserted through the fuselage and main wing
Improved main wing set and landing gear installation optimizes strength of structure and reduces
assembly time
64mm 11-blade ducted fan
2840-KV3150 motor
Predator 40A ESC
5x 9g servos
The latest EPO foam material creating a stronger, more impact-resistant plane
Environmentally friendly water-based paint minimizes blistering from sun
Pre-installed newly designed control horns allows more throw
To Next Page
Loading...
