FMS Edge 540 FMM066P User Manual

Essential safety guidelines for operating the model and handling components.

The main body of the aircraft with integrated parts.

The vertical control surface for yaw.

The horizontal control surface for pitch.

Components for the aircraft's undercarriage.

The rotating blades and their housing.

Contains extra components for the model.

Structural tubes for attaching wings and tail.

Details the available replacement parts with order numbers.

Visual representation of all available spare parts.

Instructions for attaching the primary landing gear components.

Steps for attaching the rudder to the tail fin using hinges.

Procedure for fitting the control horn to the aileron.

Steps to mount the horizontal stabilizer halves.

Guide for attaching the wing root fairing to the fuselage.

Instructions for attaching the main wings to the fuselage.

Steps for connecting the radio receiver to the aircraft's systems.

Guide for placing and securing the flight battery in the model.

Instructions for connecting control surfaces via linkage rods.

Details on ESC, motor, battery, and aircraft specifications.

Guide for binding receiver, setting control sticks, and checking surfaces.

Adjusting servo arms and linkage for proper control surface alignment.

Setting ATV and dual rates for control surface movements.

Verifying the propeller motor spins in the correct direction.

Step-by-step guide for attaching the propeller and spinner.

Procedure for balancing the model aircraft at the correct center of gravity.

Guidelines for selecting an appropriate and safe location for flying.

Testing radio system range to ensure reliable control.

Tips for managing flight duration using a timer.

Guidance on initiating flight and gaining altitude.

Advice on general flight, including loops and rolls.

Instructions for bringing the model down safely.

Procedures for keeping the model in good working order.